Product Sections

Best Sellers

Vacuum Pump, Aspirator

£11.52

Vacuum Pump, Aspirator
Maximum free air pumping capacity of 11.5 litres per minute at a water flow rate of 6.5 litres per minute. Operates efficiently with water pressures as low as 7.5 psig (.517 bar) for minimum water consumption. Ultimate vacuum: 28-1/2in (723.9 mm) Hg. Comes with integral check valve, 3/8-in NPT connection thread, and 4-3/4in length of tubing for insertion in discharge end.
find out more

Economy Wash Bottles

£22.85

500ml volume made of Low Density Polyethylene
Top dispensing wash bottle with closure and stem moulded in one piece for leakproof service. Tip can be cut back to increase flow. Tight fit of draw tube and closure prevents separation.
find out more

Wide Mouth Bottles

£10.69

Round 30ml bottle; height: 63mm and diameter: 34mm made of High Density Polyethylene
Durable, general purpose bottles with countless applications in the lab or field. Translucent, more rigid than LDPE. Wide mouth is easy to fill with dry materials or liquids. Suitable for shipping liquids. Leakproof.
find out more

Fluorinated Solvent Wash Bottles

£16.57

250ml volume made of High Density Polyethylene
Self venting. Non metallic vent keeps solvent in bottle. No risk of solvent leakage. Offers low permeability and excellent chemical resistance to many organic solvents. Useful over a temperature range from 0°C to 90°C. Silk screened in red. Fluorinated HDPE reduces the risk of absorption of the solvent into the bottle itself. Leakproof.
find out more

Square Bottles

£25.15

Square 2000ml bottle; height: 271mm and diameter: 116mm made of Polycarbonate
General purpose transparent storage bottles for aqueous liquids and short term storage of media. Before autoclaving, just set closure on top of the container without engaging the threads. Leakproof.
find out more

Narrow Mouth Bottles.

£23.56

Round 1 litre bottle; height: 216mm and diameter: 91mm made of Polypropylene
Ideal bottle for lab applications requiring excellent chemical resistance and autoclavability of containers with or without contents. Leakproof.
find out more

Filterware

Online Catalogue | Filterware

Filter Funnel with Clamp

Part Code: 315-0047

Quantity: 1

Price: £121.45 (Excluding VAT at 17.5%)

Quantity:

47mm filter unit. Upper Volume 250ml
Durable, break resistant plastic filter funnel complete with clamp for use in microbial & particulate analysis. Clear polysulfone is non toxic, exhibits low protein binding & is easy to clean. Funnel is graduated from 100 to 250ml. No leakage or bypass even after autoclaving. Membrane support plate firmly hol 47mm membrane. Snug fitting cover has 3 ports, fitted with friction-fit cap. Spring loaded clamp hol funnel & stem together yet allows easy retrieval & replacement of membrane as well as one handed operation. Funnel may be used with any filtering flask or filter manifold which accepts a No 8 stopper with a 9/16-in (15mm) hole. (Cat No 396-0080)
see larger image of this product by clicking here

Reusable Filter Holder with Receiver

Part Code: 300-4000

Quantity: 1

Price: £89.10 (Excluding VAT at 17.5%)

Quantity:

Sterilisation / Analytical filtration 47mm or 50mm filter unit. Receiver Capacity 250ml Upper Volume 250ml
Autoclavable, reusable filter unit. Major components are molded of durable, highly break resistant, transparent polysulfone. For use with 47 or 50mm membranes. Two different membrane support plates: Sterilisation plate for maximum flow rate & throughput. Analytical plate for optimal membrane support & keep membrane flat. Two side arms allow connection to vacuum line, also accept syringe filters. Tubing adaptor can be stuffed with cotton wool for sterile venting and accepts 1/4-in to 5/16-in ID vacuum tubing. Cover allows convenient storage of sterile filtrate. Graduated.
see larger image of this product by clicking here

Reusable Filter Holder with Receiver

Part Code: 300-4050

Quantity: 1

Price: £132.40 (Excluding VAT at 17.5%)

Quantity:

Sterilisation / Analytical filtration 47mm or 50mm filter unit. Receiver Capacity 500ml Upper Volume 500ml
Autoclavable, reusable filter unit. Major components are molded of durable, highly break resitant, transparent polysulfone. For use with 47 or 50mm membranes. Two different membrane support plates: Sterilisation plate for maximum flow rate & throughput. Analytical plate for optimal membrane support & keep membrane flat. Two side arms allow connection to vacuum line, also accept syringe filters. Tubing adaptor can be stuffed with cotton wool for sterile venting and accpets 1/4-in to 5/16-in ID vacuum tubing. Cover allows convenient storage of sterile filtrate. Graduated.
see larger image of this product by clicking here

Reusable Filter Holder with Receiver

Part Code: 300-4100

Quantity: 1

Price: £172.45 (Excluding VAT at 17.5%)

Quantity:

Sterilisation / Analytical filtration 47mm or 50mm filter unit. Receiver Capacity 1000ml Upper Volume 500ml
Autoclavable, reusable filter unit. Major components are molded of durable, highly break resitant, transparent polysulfone. For use with 47 or 50mm membranes. Two different membrane support plates: Sterilisation plate for maximum flow rate & throughput. Analytical plate for optimal membrane support & keep membrane flat. Two side arms allow connection to vacuum line, also accept syringe filters. Tubing adaptor can be stuffed with cotton wool for sterile venting and accpets 1/4-in to 5/16-in ID vacuum tubing. Cover allows convenient storage of sterile filtrate. Graduated.
see larger image of this product by clicking here

Vacuum Manifold

Part Code: 345-0001

Quantity: 1

Price: £1,034.80 (Excluding VAT at 17.5%)

Quantity:

Vacuum Manifold
Solid and stable on the benchtop. Designed with three vacuum outlets, each with leakproof, two way valve and vent port. Each outlet securely holds a No 8 stopper and the stem of a filter funnel without interference. Outlets are spaced for easy manipulation of individual funnels. Teflon stopcock on each valve shuts off flow when fewer than three outlets are used. Barbed fitting accepts 3/8-in (9.5-mm) I.D tubing. For simultaneous filtrations with increased filtrate volume in particulate and microbial analysis, use with Nalgene filter funnel with clamp (Cat No.DS0315-0047), a complete filtration system. May also be used with Nalgene analytical filter funnel (Cat No's 140, 145 and 147) and filter holder with funnel (Cat No's DS0310-4000 & DS0310-4050).
see larger image of this product by clicking here

Online Catalogue | Filterware

Filterware

Filter Funnel with Clamp

Price: £121.45 (Excluding VAT at 17.5%)

Reusable Bottle Top Filters

Price: £94.25 (Excluding VAT at 17.5%)

Reusable Bottle Top Filters

Price: £94.25 (Excluding VAT at 17.5%)

Reusable Bottle Top Filters

Price: £125.00 (Excluding VAT at 17.5%)

Reusable Bottle Top Filters

Price: £125.00 (Excluding VAT at 17.5%)

Reusable In-Line Filter Holder

Price: £151.45 (Excluding VAT at 17.5%)

Reusable Filter Holder with Funnel

Price: £91.25 (Excluding VAT at 17.5%)

Reusable Filter Holder with Receiver

Price: £89.10 (Excluding VAT at 17.5%)

Reusable Filter Holder with Receiver

Price: £132.40 (Excluding VAT at 17.5%)

Reusable Filter Holder with Receiver

Price: £172.45 (Excluding VAT at 17.5%)

Filter Stopper

Price: £24.00 (Excluding VAT at 17.5%)

Filter Funnel Adaptor

Price: £29.95 (Excluding VAT at 17.5%)

Filter Forceps

Price: £27.50 (Excluding VAT at 17.5%)

Filter Forceps

Price: £27.50 (Excluding VAT at 17.5%)

Vacuum Manifold

Price: £1,034.80 (Excluding VAT at 17.5%)

Filling Bell

Price: £33.75 (Excluding VAT at 17.5%)

Bubble Point Test Apparatus

Price: £2,760.65 (Excluding VAT at 17.5%)