50 Litre Carboy

50 litres, Round, made of Low Density Polyethylene
Useful for storing & shipping chemicals and for packaging and transporting corrosive materials. Graduated 1-gallon and 5 litre increments. Wide shoulder handles for easy carrying and pouring. Closure size is 83B (83mm) Also takes standard No 13-1/2 rubber stoppers. Leakproof
see larger image of this product by clicking here

50 litres, Round, made of Polypropylene
Moulded in autoclavable PP. Excellent for large batches of culture media, distilled water and other solutions. Graduated in 1 gallon and 5 litre increments. Closure size is 83mm. Not recommended for use with hazardous materials. Accepts No. 13-1/2 rubber stopper. NOTE :Before autoclaving, just set cap or closure on top of the container without engaging the threa. Autoclavable / Graduated / Leakproof.
see larger image of this product by clicking here

50 litres, Round, made of Low Density Polyethylene
Serrated tubulation moulded in one piece with bottle, not welded on, for strength and leak resistance. Outlet low on bottle for more complete drainage. Wide shoulder handles for easy carrying. Graduated in 1 gallon and 5 litre increments. This size takes 5/8 inch (16mm) I.D tubing. A hose clamp should be use when attaching tubing to ensure a tight fit and avoid leaking. Graduated / Leakproof.
see larger image of this product by clicking here

50 litres, Round, made of Low Density Polyethylene
Suitable for collecting and dispensing distilled water, reagents, acids. Graduated in 1 gallon and 5 litre increments. Spigot boss moulded in one piece with bottle, for strength and leak resistance. Spigot closure (Cat No 6423-0010) included. Leakproof.
see larger image of this product by clicking here

50 litres, Round, made of Polypropylene
Use for storing and dispensing solutions & media. Ideal for sterile water storage - can be autoclaved before refilling to stop recurring algae or bacterial growth. Excellent chemical resistance. Closure size is 83mm. Also take No 13-1/2 stopper. Graduated in 1 gallon and 5 litre increments. Spigot boss moulded in one piece with bottle for strength and leak resistance. Spigot closure (Cat No 6423-0010) included. NOTE: Autoclave only when empty. Before autoclaving, just set cap or closure on top of the container without engaging the threads. Leakproof
see larger image of this product by clicking here

50 litres, Round, made of Polypropylene
Standard Nalgene Carboy with installed 1-1/2-inch sanitary fitting welded in for use as a dispensing port. Fitting is located on side near bottom and provides a secure hook-up allowing the carboy to be used as a supply reservoir to a larger system such as a fermentor. Moulded in autoclavable PP. Closure size is 83B (83mm) Not recommended for use with hazardous materials. Accepts No 13-1/2 Rubber stopper. Before autoclaving, just set cap or closure on top of container without engaging the threads. Autoclavable / Graduated / Leakproof
see larger image of this product by clicking here